New Products

	This is our 1/4 scale aluminum Fokker cowling kit.   It comes complete with all the needed hardware to mount and re-create a Fokker cowling.  Some of the cowling kit features are fasteners, cable,  posts,  manufacturing plate, cable groove, drill bit and photo illustrated instructions.  The cowl can be mounted using the supplied cable or if desired screws. Approx. size - 10-1/2" diameter and 4" deep.  Visit our photo galleries to see finished cowlings. Order - Fokker cowling kit	$69.50
	This is our 1/4 scale Fokker pilot seat and harness kit.  The kit includes the following - aluminum seat back, lozenge fabric cover, leather seat cover, harness adjusters and fasteners, drill bit, harness, thread, needle, screws and photo illustrated instructions.  Note that the seat frame is not included.  This pilot seat will add a nice scale touch to your Fokker project. Order - Fokker pilot seat kit ** New product - 1/3 scale Fokker pilot seat kit	$15.00   $24.50
	This is our 1/4 scale Fokker ammo box.  The photo shows it installed in our D8 kit.  The ammo box will fit the William Brother's Spandau guns. The ammo box kit includes the plywood, balsa pieces, brass pins and photo illustrated instructions.  The ammo box can easily be used on Fokker WW1 type aircraft. Order - Fokker ammo box kit   ** New product - 1/3 scale Fokker ammo box kit Optional - Williams Brothers Spandau guns	$9.50     $14.50   $14.00 each
	This is our 1/4 scale wheel cover kit.  The kit includes two light, dark lozenge wheel covers, four hub adapters and photo illustrated instructions..  The wheel covers are designed to work with William Brother's Vintage 6-5/8" wheels. The photo shows the wheel covers in use.  They really add a nice touch to your scale project. Order - Lozenge wheel covers   Optional - William Brothers Vintage wheels	$6.00     $36.00
	This is our 1/4 scale full cockpit kit.  The kit includes - compass, pilot seat, harness, control column, rudder pedals, aileron levers, floor board, heal plates, throttle quadrant, magneto and control column grips.  The kit also includes photo illustrated instructions.  This kit can easily be adapted to any 1/4 scale Fokker project; although it does come from our D8 kit which is shown.  Visit our D8 photo gallery to see other cockpit photos. Order - Fokker cockpit	$86.00
	Our leather set includes the following - front and rear cockpit coaming, ten cable exits, four baffle cable supports, control column re-enforcements and seat cover.  This leather is very thinned and stained a dark brown.  The leather adds a nice scale touch to any 1/4 scale Fokker project.  Visit our photo galleries for completed leather pictures. Order - Leather kit	$12.50
	Our 1/4 scale dummy engine kit is designed to mount around the crankshaft of your engine.  The photo shows the dummy engine installed on our D8 using a Laser 200v twin engine.  The kit includes the balsa, plywood pieces, supporting music wire, screws, brass tube supports and photo illustrated instructions.  This dummy engine is easily removed and mounted.   The front and rear plate of the dummy engine can be modified to fit around a lot of different engines.  The dummy engine kit is designed to use William Brother's Gnome cylinders. Order - Dummy engine kit Optional - William Brother's Gnome Cylinders (four needed)	$8.50   $4.50 each

Windsock Datafiles

	This is the latest Windsock Fokker Triplane publication. This book is a must have for any Fokker Triplane builder. It has marvelous photos, drawings and data. It contains 40 pages, 8 of them in color. Camouflage and markings are covered in detail. Scale drawings and a center spread drawing completes the detailed review.     Order - Datafile DR1	$30
	Recently reprinted, the highly popular Fokker D8 Datafile is now available. This publication contains the most data ever printed on the Flying Razor. Thirty six pages cover the D8 from prop to tail. This is another 'must have' publication.   Order - Datafile #25  D8	$22
	The latest Fokker release from Windsock is the D6 This publication covers this biplane in detail. Little was known about this aircraft until this publication. 32 pages describe this plane from front to back. It's a book in its own class. Order - Datafile #84  D6	$20

The revised Hanriot release from Windsock reveals not only the Italian origins of the design, but also a much larger production figure than previous thought - over 1500 examples - and the type's extensive postwar use.  This 36  page publication covers this biplane in detail with colorful pictures and detail drawings. Order - Datafile #92  Hanriot

$22

Laser 200V Engine

The Laser engine V-twin is the only multi cylinder engine currently used in FAI World and European scale competitions. The smooth power of the unique Laser V-twin increases the life and reliability of your model and radio. Laser V-twins are easy to operate and extremely reliable. The sound of the V-twin is slightly off beat and distinctive, quieter and more acceptable than a single. The 90 degree layout allows perfect primary balance for smoothness and low vibration levels. The LASER 200 V-twin four stroke engine has all these features       Highest quality - anywhere.       Competition proven performance.       Very high power/weight ratio.       Extremely compact design.       OHV with ‘wedge’ combustion chamber.      Silencer designed to fit within cowl.      Twin Camshafts for power.      Twin piston rings for reliability.      Fully hardened valves and valve gear.      Race proven nickel silicon carbide electro-plated cylinder.      Every engine test run for final quality check.      CNC machined inside and out from solid.      Low cost spares and servicing direct by manufacturer.      NITROMETHANE not needed for normal running

Laser 200V-Twin four stroke engine - $825.00

(Includes - engine, mounting hardware and exhaust (silencers).

BACK